VBOX 3i 100Hz

VBOX 3i is the most powerful GPS data logging system built by Racelogic. Using a new GPS engine, VBOX 3i logs data 100 times a second, and features a 400MHz power PC processor. With IMU integration, USB and Bluetooth connectivity, compact flash card logging, and audio functionality for voice tagging, VBOX 3i represents a flexible solution to a range of testing requirements.

For accurate testing even in areas where view of the sky is obstructed, VBOX 3i has the ability to take the information from a Racelogic IMU (inertial measurement unit), pictured below, and combine this with the GPS data in real time to improve the quality of the measured parameters. The three accelerometers and three gyros inside the IMU are used to keep track of the attitude of the vehicle and will greatly increase the velocity and position accuracy during periods when satellite visibility is poor.

Click here for VBOX 3i data sheet.

VBOX 3i 100Hz with RTK + GLONASS

The VBOX 3i with RTK and GLONASS expands on the VBOX 3i's capability to offer extremely high positional accuracy. When used with the optional RTK enabled Basestation, VBOX 3i is capable of achieving 2cm 95% CEP positional accuracy. The RLVB3iR2G2 has the added capability of detecting Glonass as well as GPS satellites. This makes the 2cm RTK lock more robust and more quickly accessible, enabling users to undertake tests that require very high levels of positional accuracy, such as accurate track mapping, adaptive cruise control, collision mitigation, lane departure, and auto parking systems testing and development.

Click here for VBOX 3i with RTK + GLONASS data sheet.

VBOX 3i Dual Antenna

VBOX3i dual antenna (VB3iSL) is Racelogic's most powerful GPS data logging system. By utilizing two GPS engines configured in a 'Fixed Baseline RTK setup', the VB3iSL combines high-level accuracy and test repeatability with the ability to measure slip and pitch/roll angles at 100Hz.

Enabling users to intuitively measure set parameters during acceleration, deceleration, braking, ABS and ESP testing, handling and many other types of high dynamic tests, VB3iSL combines a system renowned for accuracy with the ability to record data via additional parameters to a single unit.

Click here for VBOX 3i Dual Antenna data sheet.

VBOX IISX + Slip, Pitch and Roll Angle

The RLVB20SL3 is a powerful instrument used for measuring the speed, position and angle of a moving vehicle.

It utilises a new generation of high performance satellite receivers, and will measure acceleration figures, braking distances, lap times, cornering forces, slip, pitch and roll angles and much more.

The RLVB20SL3 is based on the successful twin antenna RBVB20SL design, but incorporates a third GPS channel to allow simultaneous angle measurements in 3 axes.

Click here for VBOX IISX + Slip/Pitch/Roll data sheet.

Marine VBOX 20Hz Data Logger for speed & attitude measurement

The Marine VBOX (RLVB20SL3-M) is a powerful new data-logging package from Racelogic, designed specifically for the marine testing environment. Utilising a new generation of high performance, multi-antenna GPS engines, it can measure Speed, Acceleration, Position and all 3 attitude angles; Pitch, Roll and Yaw (alternatively known as Trim, Heel and Leeway).

Because these angles are measured directly, there is no drift which normally affects inertial systems in this environment.

The RLVB20SL3-M is supplied as a complete package, with the benefit of a splash proof case, for the convenient and cost-effective measurement of marine vessel dynamics.

Click here for Marine VBOX 20Hz Data Logger data sheet.

VBOX IISX + Slip Angle

The VBOX is a powerful instrument used for measuring the speed, position and angle of a moving vehicle. It is based on a new generation of high performance satellite receivers, and will measure acceleration figures, braking distances, lap times, cornering forces, slip angle and much more.

Due to the small size and simple installation procedure with built-in configuration screen, the VBOX is ideally suited for use in cars, bikes, off road vehicles and boats.

The VBOX IISX + Slip Angle uses a dual-antenna, dual-GPS engine system to measure slip angle to as much as a 1/8th-degree accuracy.

Click here for VBOX IISX + Slip Angle data sheet.

VBOX IISX 5/10/20Hz

The VBOX IISX is a powerful instrument used for measuring the speed and position of a moving vehicle at 20Hz. It is based on a new generation of high performance satellite receivers, and will measure acceleration figures, braking distances, lap times, cornering forces and much more. Due to the small size and simple installation procedure, the VBOX is ideally suited for use in cars, bikes, off road vehicles and boats.

Click here for VBOX IISX 5/10/20Hz data sheet.

VBOX Micro

The VBOX Micro is a small, waterproof (IP66) GPS data logger with a user-selectable log rate from 1 sample per minute to 10 samples per second. The VBOX Micro measures time, speed, distance, position, acceleration, height and vertical velocity and logs data to a removable Compact Flash card.

It features CAN Input and Output, USB interface for configuration, status LEDs and Compact Flash logging. The small form factor, ruggedness and flexible logging rates make the VBOX Micro ideal for durability testing, motorcycles, boats, mining trucks and race cars.

Two versions are available, the RLVBMIC01 featuring basic CAN connection to Racelogic units and the RLVBMIC01C, allowing connection to other manufacturer's CAN units and vehicle CAN. If required, manufacturers CAN Data sets are available for an additional charge.

Click here for VBOX Micro data sheet.

VBOX Mini

The VBOX Mini is a low cost, self-contained GPS data logging and display system suitable for a large range of vehicle testing applications.

Using a high performance GPS engine, data such as velocity and position are accurately recorded at 10Hz.

To further enhance the VBOX Mini, an optional Input/Output module is available for collection of data from external signal sources such as throttle position or engine RPM.

In addition to the data recorded onto the flash memory card, data from the VBOX Mini can be output via a direct PC link in real time for live viewing in the included VBOXTools software.

Click here for VBOX Mini data sheet.

Video VBOX Pro

Video VBOX Pro combines a powerful GPS data logger with a high quality multi-camera video recorder and real-time graphics engine.

Multi-Camera Recording
Taking up to four waterproof cameras and combining them with a customisable graphical overlay, Video VBOX Pro streams video onto a flash card or USB stick as a DVD quality MPEG4 file.

High Accuracy Data Acquisition
A 10Hz GPS engine provides parameters such as circuit position, lap timing, speed (accurate to ±0.1km/h), and acceleration. The optional 32-channel CAN interface retrieves vehicle data such as throttle angle, RPM, and brake pressure.

Suitable for many applications
The rugged portability and functionality of Video VBOX Pro means that itŐs ideal for a variety of applications from automotive testing, to motorsport, driver training, and industrial applications. Whether you need a system for race recording and analysis, or for development and verification of Advanced Driver Assistance systems — Video VBOX Pro offers a new dimension to data logging.

Intuitive Software
The setup software supplied with the system allows you to choose standard dashboard styles and maps or customise your own. The Performance Tools software provides an intuitive way to analyse the data recorded by the system alongside the video.

Using Video VBOX Pro is quick and easy. Simply connect the cameras and the GPS antenna, insert the SD card or USB stick, and go.

Click here for more information and sample videos

Click here for Video VBOX data sheet.

Video VBOX Lite 10Hz

Powerful VBOX datalogging and video technology in a user-friendly, affordable product

Video VBOX Lite is a one box solution, incorporating a solid state video recorder, a VBOX 10Hz GPS data-logger and a real time graphic overlay. This combination allows users to carry out detailed driver training and vehicle analysis without the expense and specialised knowledge involved in professional level data-loggers.

Based on the high end Video VBOX, Video VBOX Lite is a more affordable version of what Video VBOX users have called the ultimate track video system. Housed in a rugged plastic box, with a smaller footprint than the parent VideoVBOX, Video VBOX Lite shares many of the same features as the top of the range product.

What can Video VBOX Lite do?

Video VBOX Lite takes the video captured from multiple waterproof cameras and combines it with a customisable graphic overlay, streaming the resulting video onto an SD card as a DVD quality MPEG4 file. A 10Hz GPS engine provides information such as circuit position, lap timing, speed (accurate to ±0.2km/h) and acceleration, whilst a single CAN channel can retrieve data such as RPM.

The data is seamlessly integrated with real time graphics, meaning that video game style dials and gauges can be shown on the multi-camera video, with the option to fully customise the graphics using the included Video VBOX Lite Setup software.

Click here for Video VBOX Lite data sheet.

VBOX Slip Angle Sensor

The VBS20SL is a multi-purpose non-contact slip angle measurement instrument. Using an advanced dual antenna GPS engine, the VBS20SL can calculate not only speed and direction of travel of the vehicle but also an extremely accurate slip angle. The VBS20SL also features a built-in graphic display allowing the user to set up and configure the unit without using a laptop PC.

The VBS20SL can be used in conjunction with any VBOX GPS datalogger, as well as any third-party dataloggers.

Click here for VBOX Slip Angle Sensor data sheet.

VBOX 5/10/20/100Hz Speed Sensors

Based on a range of high accuracy GPS engines, VBOX Speed Sensors offer the ultimate non-contact measurement solution.

With 5Hz, 10Hz, 20Hz, and 100Hz GPS update rate options available, the Speed Sensor range suits a variety of budgets and requirements. All units are also compatible with the DGPS Basestation for increased positional accuracy.

The units all have the same small hardware footprint, at only 9cm long, making mounting and transportation easy. The Speed Sensors are perfect for automotive testing, motorsport, marine, telematics, and data-logging applications. The IP66 rating means that each unit is water and dustproof, allowing them to be used in a variety of conditions.

Data output is via CAN Bus, offering easy integration with data loggers and testing applications.

Each speed sensor also features analogue and digital outputs. The analogue output can be assigned to vehicle speed, lateral acceleration, longitudinal acceleration, or lap beacon marker with user selectable scaling. The digital output can be configured as either a digital speed pulse output or a lap beacon marker.

Click here for VBOX Speed Sensors data sheet.

GPSTran 5Hz Speed Sensor

The Racelogic GPSTran is a low-cost speed sensor designed for use in commercial applications, including agricultural and taxi use. Output is a simple digital pulse, and all that is needed for installation is a power supply and antenna.

Click here for GPSTran data sheet.

OLED Displays

The OLED display is the perfect partner to VBOX data logging systems. It is fully waterproof, and features sharp graphics and simple operation for quick and easy in-vehicle use. The OLED display has the ability to show a range of parameters, including live and max speed, g-force, and lap times, and can quickly switch between display modes using the Up and Down buttons.

The display has the capacity to start and stop logging in conjunction with some VBOX models, and can also report logging status. The unit has an internal accelerometer that flips the screen in accordance with the way it is mounted, and the option to invert screen colours or display the font as a high contrast outline to match lighting conditions makes it very flexible.

There are three versions of the display to suit a range of applications and to ensure product compatibility. The unit is available in either waterproof aluminium (pictured above) or splash proof plastic and aluminium, with options for Fischer and Lemo connectors. The display can work with VBOX 3i, Video VBOX, VBOX Micro, VBOX III, VB2SX, VB20SL, VB20SL3, and Performance Box Sport — full compatibility options are detailed in the specifications on the data sheet.

Click here for OLED Display data sheet.

Multi Function Display

Large character VBOX LCD data display with integral backlight. Up to four user-configurable VBOX CAN parameters can be displayed on screen at one time. Supports display of RLVBADC02 and RLVBTC8 data. Also includes brak test functions such as MFDD and distance from brake trigger activation and lap timing functions. There is also a target screen indication how far the vehicle is from a user defined parameter.

Click here for Multi Function Display data sheet.

File Manager

The VBOX File Manager is designed to enhance the use of the VBOX III data logging system by giving fast and easy user control of files. For ease of use, the file manager features a clear graphic LCD display to indicate VBOX status. User control is via a push-button rotary adjuster giving a fast and simple operation.

Click here for File Manager data sheet.

CAN Bus Display

The Racelogic CAN Display is a versatile tool for display of real-time CAN Data. Aimed at both test engineers and network engineers, the CAN Display is capable of displaying raw CAN frames and individual CAN signals from a CAN database. The PC software supplied with the CAN Display allows the user to read and download up to 64 signals from their own industry standard DBC format database.

Click here for CAN Display data sheet.

16-bit Analog Interface

The RLVBADC03 is an 8-channel analog voltage input module designed for use with the Racelogic VBOX. Each channel is electrically isolated and provides bipolar voltage measurement up to ±50v with a DC accuracy of 400µV. Isolated, regulated 5v and 12v supplies are available on the main 25-way D-sub connector in addition to a supply voltage connection. Configuration software aupplied with the ADC03 allows scale and offset of the voltage reading for conversion into real data.

Click here for ADC03 data sheet.

Thermocouple Interface

The RLVBTC8 8 Channel thermocouple interface module allows up to 8 K-type thermocouple channels to be logged by the Racelogic VBOX. The TC8 is linked via CAN bus to the VBOX and can be used in conjunction with other units such as the ADC03 analogue interface or the CAN02 vehicle CAN bus interface.

Click here for TC8 data sheet.

Vehicle CAN Interface

The vehicle CAN bus interface allows acquisition of data from in-vehicle CAN network by VBOX. 16 User defined CAN signals may be captured from vehicle bus, scaled, and then passed to the VBOX for logging to RAM or Compact Flash memory. Supports 125Kbit, 250Kbit, 500Kbit, and 1Mbit CAN data rates.

Click here for CAN02 data sheet.

Frequency Input Module

The RLVBFIM03 is a 4-channel frequency capture module designed to allow logging of frequency information by a VBOX. The four signal inputs will accept a wide rance of voltage levels including direct connection to vehicle ABS sensors. A CAN bus interface connects this unit to a VBOX for logging. Data capture is configurable as wheel RPM, wheel speed or pulse frequency, making the FIM02 suitable for measurement of other frequency signals such as fuel flow meters or engine RPM signals. The FIM03 is housed in a rugged waterproof enclosure allowing location anywhere on the vehicle, including under the hood.

Click here for FIM03 data sheet.

VBOX Mini Input Module

The VBOX mini input module is a general purpose input/output module designed for use by either the VBOX Mini or existing VBOX products. The MIM01 offers eight analog voltage inputs, three digital inputs and two thermocouple inputs. When used with a VBOX Mini, the MIM01 also offers a speed output via analog voltage or digital pulse.

Click here for Mini Input Module data sheet.

Yaw Rate Sensor with Accelerometers

The RLVBYAW03 is an advanced vehicle yaw rate sensor with integral accelerometers. The accelerometers are mounted in the X and Y plane for measurement of lateral and longitudinal acceleration.

The YAW03 is constructed wit a splash-proof casing, which is rated to a limited ingress IP rating of IP66, making it ideal for use on boats or in harsh environments.

Click here for YAW03 data sheet.

Inertial Measurement Unit

The RLVBIMU 03 is an advanced inertial measurement sensor containing three accelerometers and three yaw rate sensors which, when combined with the VBOX data logging system, can provide information such as vehicle pitch, roll and yaw.

The IMU is now constructed with a splash-proof casing, which is rated to a limited ingress IP rating of IP66, making it ideal for use on boats or in harsh environments.

Click here for IMU03 data sheet.

Bluetooth Module

The RLVBBT01 VBOX Bluetooth Module is a general purpose Bluetooth adapter, designed as an alternative to using a hard-wired serial connection between the VBOX and either a Q1 display (recommended) or Laptop PC equipped with a bluetooth interface. The RLVBBT01 module allows the user to place the VBOX in a safe, dry and convenient location, facilitating the free use of the Q1 display, either by hand or mounted, without any cabling restrictions.

The RLVBBT01 offers high-speed serial communications at 115K baud rate, ensuring full data capture and transfer. The RLVBBT01 has minimal power consumption, resulting in insignificant drain on the VBOX power source — particularly useful when using a VBOX battery pack.

Click here for Bluetooth Module data sheet.

Telemetry Link

The Racelogic RLRTM915BS / RLRTM915TR radio modules are designed for use with the VBOX range of products. Each module contains a high power radio modem capable of transmitting and receiving RS232 serial data.

Operating at 915 MHz, the radios can be used throughout the USA and have a max range of 1.8km. The radios can be used with a BaseStation to provide DGPS corrections to a VBOX.

Click here for Telemetry Link data sheet.

Differential GPS Base Station

The Differential Base Station is a complete differential correction system designed to provide local correction for improved GPS accuracy. By programming the base station with a known GPS position, it is able to accurately monitor the difference between its programmed position and the position that it is receiving via GPS. This difference is transmitted via radio to allow a remote GPS system to correct position.

Click here for Base Station data sheet.

CAN to Analog Output Module

The RLVBDAC01 has four analog outputs and four digital outputs. PC software allows the user to define CAN bus data to be converted into analog voltage or digital form. The output voltage resolution is 12 bit.

Click here for DAC01 data sheet.

Thermal Printer

The RLVBACS026 is a rechargeable battery powered thermal printer for use with the Racelogic Multifunction display. Printing functions include automatic printing of acceleration, deceleration, brake testing, and lap timing results. The printer is supplied complete with Ni-Cd battery pack and charger.

Click here for Thermal Printer data sheet.

CAN Bus Speed Interface

The CAN Speed Interface is a quick and convenient way of getting a digital RPM and road speed signal from a vehicle. The unit connects to the CAN bus, and translates the CAN bus messages into two digital outputs proportional to engine RPM and road speed.

Click here for CAN Speed Interface data sheet.

DriftBox & PerformanceBox

For the PerformanceBox and DriftBox,
please visit the VBOX USA online store.

Click here for DriftBox data sheet.

Click here for PerformanceBox data sheet.